Automatic or Manual Operation – Program 3 axis (X ,Y &Z) with full interpolation by CNC Control.
Hand wheels for manual movement of the X-axis and Y axis, Knee movement manual or automatic rapid
E-stop button- Auxiliary machine interface, AMI, to control up to 4 devices.
Two speed ranges, 5HP constant drive, mechanical infinite variable speeds, reaches full horse power over all the speed range, (Low 60 to 500 – High 500 to 4300 RPM) without the typical loses characteristic of EVS systems.
The quill 4.13” (105 mm) is hard chromed with precision ground rack.
Republic Lagun’s Vertical Mill Mega 4 Volume is a 3 Axis CNC Vertical Milling Machine with a 4th axis DRO manual knee movement. The mill allows up to 1,200 lb of work piece weight because of its extra long saddle, an automatic lubrication system, and CNC rapid traverse on all X, Y, and Z axes.
*Note: Looking for more Vertical Knee Mills? Please take a look at our Mega 4 Surface and Millmatic III mills. Or browse all our Mills here.
Check us out on Instagram for more posts and videos!
| Mill Model: | FTV-2F | MVM-1 | MVM-2 | MVM-4 | Millimatic II | Millimatic III | Mega 4 Surface | Mega 4 Volume |
|---|---|---|---|---|---|---|---|---|
| Table Size | 55.25″ x 10″ | 49″ x 9″ | 50″ x 10″ | 58″ x 12″ | 55.25″ x 10″ | 55.25″ x 10″ | 58″ x 11″ | 58″ x 11″ |
| Weight Cap: | 750 lb | 400 lb | 661 lb | 1,200 lb | 750 lb | 750 lb | 1,200 lb | 1,200 lb |
| X Travel | 38″ (34.5″ w/PF) | 30″ | 35″ (32″ w/PF) | 39.37″ | 36″ | 36″ | 37.38″ | 41″ |
| Y Travel | 15.98″ | 12″ | 16″ | 15.35″ | 15.25″ | 15.25″ | 14.6″ | 14.5″ |
| Z Travel | 15.98″ | 16″ | 16″ | 15.75″ | 16″ | 16″ | 15.75″ | 15.75″ |
| Ram Travel | 22.44″ | 15.35″ | 22.04″ | 20″ | 22.2″ | 22.2″ | 20″ | 20″ |
| Motor HP | 5 HP | 3 HP | 3 HP | 5 HP | 5 HP | 5 HP | 5 HP | 5 HP |
| RPM Range | 55-4,250 | 60-4,200 | 60-4,500 | 60-4,300 | 55-4,250 | 55-4,250 | 60-4,300 | 60-4,300 |
| Drilling Cap | 1.25″ | |||||||
| Milling Cap | 4 Cu in/min | |||||||
| Boring Range | Up to 8″ | |||||||
| Spindle Taper | R-8 | R-8 | R-8 | #40 NST | R-8 | R-8 | #40 NST | #40 NST |
| Quill Diameter | 3.38″ | 3.38″ | 3.38″ | 4.13″ | 3.38″ | 3.38″ | 4.13″ | 4.13″ |
| Quill Travel | 5″ | 5″ | 5″ | 5″ | 5″ | 5″ | 5″ | 4.25″ |
| CNC? | Non CNC | Non CNC | Non CNC | Non CNC | CNC | CNC | CNC | CNC |
| CNC Axis | N/A | N/A | N/A | N/A | 2 | 3 | 2 | 3 |
One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at:
or call
800.421.2105
*Applies to domestic sales only.
Lagun Engineering has a wide variety of solutions for numerous industries and businesses. From the small garage machinist to the aerospace, medical and defense industries, Lagun delivers unmatched quality and precision.
800 Sprucelake Drive
Harbor City, CA 90710
Email: [email protected]
Phone: (310) 518-1100
Toll Free: (800) 421-2105
Hablamos Español
Fax: (310) 830-0923
800 Sprucelake Drive
Harbor City, CA 90710
Email: [email protected]
Phone: (310) 518-1100
Toll Free: (800) 421-2105
Hablamos Español
Fax: (310) 830-0923