We’re offering great New Year deals on our assembled inventory.
For the entire month of January, we’re offering great deals on our assembled inventory. Because these machines are already assembled, you can take delivery on a Lagun sooner than you think. With this limited inventory, they will go fast, so don’t wait!
FTV-2F
Outstanding Features
- The new FTV-2F model comes standard with 5” (127 mm) more table length and 5.5” (139 mm) more table travel than our previous FTV-2.
- Mechanical infinite variable speed head
- Providing full HP at all RPM’s
- R-8 spindle taper
- Square ways for rigidity and dovetail ways for accuracy
Standard Features
- Spindle taper R-8 with 4 ea. class seven hi-precision bearings
- Flood coolant system
- Hardened & precision ground ways
- One shot lubrication system
- Draw bar
- Operators manual/parts list
- Basic service tool kit
- 3/60/220/440 volt electrics.
AT-1340
Outstanding Features
- 3 V Ways, hardened and ground
- 16 speed spindle from 50 up to 2,750 RPM
- Balanced main spindle
- Tailstock spindle with American Tang
- Carriage with TURCITE to eliminate stick slip, damp cutting vibrations
- Safety carriage stop
- Heavy cast iron machine
Standard Features
- Chip and coolant tray
- Foot brake
- Full length rear splash guard
- Compound protection guard (without limit switch)
- Manual Indexing Square 4-position tool post
- Back Plate (to mount plain back 3 or 4 jaw chuck or fixture plate; dog or face plate)
- Two (2) No. 3 MT centers and main spindle reduction sleeve
- Lead screw protection cover
- Halogen work light
- Operator protection guard compound mounted
- Toolbox and manuals
- Leveling pads and bolts
- Threading dial
- Inch/metric dual dials on cross slide; compound & tailstock
- Electrics 220V (STD) /440V (OPTIONAL), 3 phase, 60 Hz (other options available)
- Flood coolant system
RL-1440
Outstanding Features
- 3 V Ways, hardened and ground (TW= 3 V Ways)
- 16 speed spindle from 50 up to 2,750 RPM
- Balanced main spindle
- Tailstock spindle with American TANG
- Carriage with TURCITE to eliminate stick slip, damp cutting vibrations
- Safety carriage stop
- Heavy cast iron machine
Standard Features
- Full length rear splash guard
- Halogen work light
- Manual indexing square 4-position tool post
- Inch/metric gearbox and dual dials
- Electrics 220 (STD) /440V (Optional), 3 phase, 60 Hz (other options available)
- Compound protection guard (without limit switch)
- Two (2) No. 4 MT centers and main spindle reduction sleeve
- Tailstock
- Back plate (to mount plain back 3 or 4 jaw chuck or fixture plate; dog or face plate)
- Threading dial
- Chip and coolant tray
- Stainless leadscrew cover
- Foot brake
- Flood coolant system
- Tool box and manuals
- Leveling pads and bolts
BM 3 RT “HEIDENHAIN TNC 640″ (19”)
- C axis Rotary Table 1600×1200 mm / 6 Tn load
- Automatic LU A milling head every 1°
- 4.000 rpm for LU A head
- Automatic greasing for LU A head
- Perimetral guarding + 2 chip conveyors
- 40 tools chain type ATC
- Air conditioner for electrical cabinet
- Cooling through the tool with 20 Bars pump with air pressure option
BM 3 “HEIDENHAIN TNC 640″ (19”)
- Table 3100×1100 mm / Cross trav. Y=1300
- Automatic milling head 1° / 4000 r.p.m
- Automatic greasing for LU A head
- 4th Axis Driving system preparation (without Driver)
- Perimetral guarding + 2 chip conveyors
- 24 tools drum type ATC
- Air conditioner for electrical cabinet
- Cooling through the tool with 20 Bars pump with air pressure option
BM 4 “HEIDENHAIN TNC 640″ (19”)
- Table 4100×1100 mm / Cross trav. Y= 1300
- Automatic milling head 1° / 4.000 r.p.m
- Automatic greasing for LU A head
- 4th Axis Driving system preparation, (Without Driver).
- Perimetral guarding + 2 chip conveyors
- 24 tools drum type ATC
- Air conditioner for electrical cabinet
- Cooling through the tool with 20 Bars pump with air pressure option
- Milling head is available in 1 or 2.5 degrees
Lagun Liberty Lathe (LLST 14×40)
- ASA Cam-Lock Spindle Nose
- Push Button Jog
- Inch/Metric Dual Dials
- Rear Splash Guard
- Foot Brake (Electronic disc)
- Thread Chasing Dial
- Coolant Pump & piping
- Chip Collector Tray
- Square Tool Post
- (2) Dead centers & headstock Sleeve
- Centralized manual lubrication of carriage & cross slide
- Complete 3/60/220/440-volt electrics including E-stop
- Service Tools and Operators Manual/Parts List
Lagun Liberty Lathe (LL-EC 13×40)
- ASA Cam-Lock Spindle Nose
- Push Button Jog
- Inch/Metric Dual Dials
- Rear Splash Guard
- Foot Brake (Electronic disc)
- Thread Chasing Dial
- Coolant Pump & piping
- Chip Collector Tray
- Square Tool Post
- (2) Dead centers & headstock Sleeve
- Centralized manual lubrication of carriage & cross slide
- Complete 3/60/220/440-volt electrics including E-stop
- Service Tools and Operators Manual/Parts List
Lagun Liberty Lathe (LL-ST-20/4)
- ASA spindle Nose
- Push Button Jog
- Inch/Metric Dual Dials
- Rear Splash Guard
- Foot Operated Electronic Disc Brake
- Thread Chasing Dial
- Coolant Pump & piping
- Chip Collector Tray
- Square Tool Post
- (2) Dead centers & headstock Sleeve
- Centralized manual lubrication of carriage & cross slide
- Complete 3/60/220/440-volt electrics including E-stop
- Service Tools and Operators Manual/Parts List
- Soft-Start: to prevent damage to spindle bearings, pulley, and belts. Spindle starts slower to prevent shock to drive components.
To find out more about these products please call us at 800.421.2105 or click the button below and send us an email.
See how RSD (Roland Sands Design) is using Lagun machines to build their amazing motorcycles.
Visit RSD to learn more about their bikes: https://www.rolandsands.com