Republic Lagun Machine Tool FTV-2FE Vertical Knee Mill With EVS
- AVAILABLE AS EITHER METRIC OR IMPERIAL
- STANDARD 55.25” (1,403 MM) TABLE LENGTH AND 37.99” (965 MM) MORE TABLE TRAVEL THAN OUR PREVIOUS FTV-2.
- INFINITE VARIABLE SPEED HEAD
- FULL HP AT ALL RPM’S
- R-8 SPINDLE TAPER
- SQUARE WAYS FOR RIGIDITY AND DOVETAIL WAYS FOR ACCURACY
We’re proud to introduce a major addition to the Republic Lagun family of mills, the FTV-2FE Vertical Knee Mill with EVS, now available as either Metric or Imperial. We’ve revamped our bestselling FTV2F vertical knee mill from the inside out, with a full EVS conversation, and an all new look.
Equipped with an ultra-powerful, and rigid Electronic Variable Speed (EVS) head that reaches full horsepower at 356 RPM, this brawny milling head produces 74 ft/lbs. (10kgm) of torque. We’ve specially designed these heads with a 2:1 gear ratio from the motor to the spindle. This gear ratio lowers motor speed while increasing torque, allowing it to reach high RPM’s.
Additionally, like our classic FTV-2F, this vertical knee mill comes equipped with induction hardened and ground ways. We’ve also included square ways for rigidity and dovetail ways for accuracy on the knee.
The FTV-2FE’s combination of a 5hp Baldor motor with a heavy duty Yakasawa drive allows it to achieve low-end torque. When combined with a 2:1 gear ratio you have a machine with precision control, less wear on its motor & bearings, more torque at higher RPM’s, and a longer lifespan.
|Main motor||5 HP (3.72 kW)|
|RPM Range (High-Low)||55 to 4,250 RPM. Low (55 to 490 RPM) High (490 to 4,250 RPM)|
|Distance, spindle to column||5 to 26.96” (127 to 685 mm)|
|Distance, spindle to table||0 to 17.99” (0 to 457 mm)|
|Spindle taper||R-8 (Opt. #40 NST; #30 NST; or Universal Q.S. 200 or 300)|
|Quill diameter||3.38” (86 mm)|
|Quill travel||5” (127 mm)|
|Table size||55.25” x 10” (1,403 x 254 mm)|
|Maximum weight on table||750 lbs. (340 kg) evenly distributed|
|Knee width||11.49” (292 mm)|
|Ram length||35.98” (914 mm)|