OUTSTANDING FEATURES:
• 20 HP Main Motor (LS-28)
• 25 HP Main Motor (LS-32 & 36)
• 4.13” (105 mm) D1-11 Spindle Bore
• Two (2) Dead Centers and Center Sleeve
• Leveling Pads
• 4-Way Power Rapid Traverse
• Chuck guard with sliding door and electric interlock
• Service Tools
• Square Tool Post
• Operator’s Manual & Parts List
• Coolant Pump & Piping
• Working Light
Includes standard equipment as described above.
Republic Lagun is proud to offer the American Turnmaster (AT) LS Series Lathes. The LS Series Lathes provide superior craftsmanship, unique design, and outstanding performance at an affordable price. Available in swings of 28”, 32”, and 36”, and centers ranging from 60″ to 240”. These lathes also incorporate up to 25 HP Drive, and a one-piece monolithic floor type bed/base casting. These two outstanding features help the LS Series provide excellent rigidity, stability under heavy cuts, and unsurpassed vibration dampening.
*Note: Interested in more Manual Lathes? To view all manual lathes offered by Republic Lagun please click here.
Check us out on Instagram for more posts and videos!
| Lathes Model: | AT-1340-G-TW | AT-1550-G-TW | AT-1840/60/80/120-G-TW | AT-2140/60/80/120-G-TW | AT- 22/26/30 |
|---|---|---|---|---|---|
| Swing Over Bed | 13.39″ | 15.23″ | 18″ | 21″ | 22″ / 26″ / 30″ |
| Swing Over Cross Slide | 8.27″ | 9.37″ | 11″ | 14″ | 13.38″ / 17.21″ / 21.57″ |
| Distance Between Centers | 39.37″ | 50″ | 40″/60″/80″/119″ | 40″/60″/80″/119″ | 60″ – 200″ |
| Length of Bed | 15.75″ | 19″ | |||
| Spindle Speed RPM Range | 50-2570 RPM | 25-2,000 RPM | 20-1600 RPM | 20-1600 RPM | 13-1,200 RPM |
| Hole Through Spindle | 1.25″ | 2.2″ | 3.15″ | 3.09″ | 4.094″ |
| Spindle Nose | D1-4 | D1-6 | D1-8 | D1-8 | D1-11 |
| Motor HP | 5 HP | 7.5 HP | 10 HP | 12.5 HP | 15HP (20HP Opt) |
| Disk Clutch Headstock | Yes | Yes | Yes | Yes | No |
| 3 V Ways | Yes | Yes | Yes | Yes | Yes |
| Quill Diameter | 1.97″ | ||||
| Quill Travel | 4.41″ | ||||
| Inch Thread Range (TPI) | 2-72 TPI | 2-72 TPI | 2-72 TPI | 2-72 TPI | 2-72 TPI |
| Metric Thread Range | 0.2 – 14 | 0.2 – 14 | 0.2 – 14 | 0.2 – 14 | 0.2 – 14 |
| Tailstock Spindle Taper | MT 3 | MT 4 | MT 5 | MT 5 | MT 5 |
| Digital Threading Control? | No | No | No | No | No |
| CNC or Manual | Manual | Manual | Manual | Manual | Manual |
| Voltage | 3/60/220 V |
One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at:
or call
800.421.2105
*Applies to domestic sales only.
Lagun Engineering has a wide variety of solutions for numerous industries and businesses. From the small garage machinist to the aerospace, medical and defense industries, Lagun delivers unmatched quality and precision.
800 Sprucelake Drive
Harbor City, CA 90710
Email: [email protected]
Phone: (310) 518-1100
Toll Free: (800) 421-2105
Hablamos Español
Fax: (310) 830-0923
800 Sprucelake Drive
Harbor City, CA 90710
Email: [email protected]
Phone: (310) 518-1100
Toll Free: (800) 421-2105
Hablamos Español
Fax: (310) 830-0923
