Republic Lagun Machine Tool Millmatic III CNC Vertical Knee Mills with Three Axes
OUTSTANDING FEATURES
- 5 HP spindle drive
- Flood coolant system
- Table and saddle locks
- All high precision ball screws X, Y, and Z axis
- 11 1/2 (292 mm) wide knee
- R8 spindle taper
- 23″ (584 mm) saddle
DESCRIPTION
Lagun’s Millmatic III CNC Vertical Knee Mills have the capacity to function also as a CNC machine, allowing to machine up to 3 axes. This series of CNC Vertical Knee Mills provides the ideal solution for the typical combination of single shot work, prototype, one-piece or short run production. The Millmatic III is a member of the Lagun FTV family, featuring 50 years of reliable service.
*Note: Looking for more Vertical Knee Mills? Please take a look at our Mega 4 Volume and Millmatic II mills. Or browse all our Mills here.
Check us out on Instagram for more posts and videos!
SPECIFICATIONS
| Mill Model: | FTV-2F | MVM-1 | MVM-2 | MVM-4 | Millimatic II | Millimatic III | Mega 4 Surface | Mega 4 Volume |
|---|---|---|---|---|---|---|---|---|
| Table Size | 55.25" x 10" | 49" x 9" | 50" x 10" | 58" x 12" | 55.25" x 10" | 55.25" x 10" | 58" x 11" | 58" x 11" |
| Weight Cap: | 750 lb | 400 lb | 661 lb | 1,200 lb | 750 lb | 750 lb | 1,200 lb | 1,200 lb |
| X Travel | 38" (34.5" w/PF) | 30" | 35" (32" w/PF) | 39.37" | 36" | 36" | 37.38" | 41" |
| Y Travel | 15.98" | 12" | 16" | 15.35" | 15.25" | 15.25" | 14.6" | 14.5" |
| Z Travel | 15.98" | 16" | 16" | 15.75" | 16" | 16" | 15.75" | 15.75" |
| Ram Travel | 22.44" | 15.35" | 22.04" | 20" | 22.2" | 22.2" | 20" | 20" |
| Motor HP | 5 HP | 3 HP | 3 HP | 5 HP | 5 HP | 5 HP | 5 HP | 5 HP |
| RPM Range | 55-4,250 | 60-4,200 | 60-4,500 | 60-4,300 | 55-4,250 | 55-4,250 | 60-4,300 | 60-4,300 |
| Drilling Cap | 1.25" | |||||||
| Milling Cap | 4 Cu in/min | |||||||
| Boring Range | Up to 8" | |||||||
| Spindle Taper | R-8 | R-8 | R-8 | #40 NST | R-8 | R-8 | #40 NST | #40 NST |
| Quill Diameter | 3.38" | 3.38" | 3.38" | 4.13" | 3.38" | 3.38" | 4.13" | 4.13" |
| Quill Travel | 5" | 5" | 5" | 5" | 5" | 5" | 5" | 4.25" |
| CNC? | Non CNC | Non CNC | Non CNC | Non CNC | CNC | CNC | CNC | CNC |
| CNC Axis | N/A | N/A | N/A | N/A | 2 | 3 | 2 | 3 |
| Mill Model: | FTV-2F | MVM-1 | MVM-2 | MVM-4 | Millimatic II | Millimatic III | Mega 4 Surface | Mega 4 Volume |
|---|---|---|---|---|---|---|---|---|
| Table Size | 55.25″ x 10″ | 49″ x 9″ | 50″ x 10″ | 58″ x 12″ | 55.25″ x 10″ | 55.25″ x 10″ | 58″ x 11″ | 58″ x 11″ |
| Weight Cap: | 750 lb | 400 lb | 661 lb | 1,200 lb | 750 lb | 750 lb | 1,200 lb | 1,200 lb |
| X Travel | 38″ (34.5″ w/PF) | 30″ | 35″ (32″ w/PF) | 39.37″ | 36″ | 36″ | 37.38″ | 41″ |
| Y Travel | 15.98″ | 12″ | 16″ | 15.35″ | 15.25″ | 15.25″ | 14.6″ | 14.5″ |
| Z Travel | 15.98″ | 16″ | 16″ | 15.75″ | 16″ | 16″ | 15.75″ | 15.75″ |
| Ram Travel | 22.44″ | 15.35″ | 22.04″ | 20″ | 22.2″ | 22.2″ | 20″ | 20″ |
| Motor HP | 5 HP | 3 HP | 3 HP | 5 HP | 5 HP | 5 HP | 5 HP | 5 HP |
| RPM Range | 55-4,250 | 60-4,200 | 60-4,500 | 60-4,300 | 55-4,250 | 55-4,250 | 60-4,300 | 60-4,300 |
| Drilling Cap | 1.25″ | |||||||
| Milling Cap | 4 Cu in/min | |||||||
| Boring Range | Up to 8″ | |||||||
| Spindle Taper | R-8 | R-8 | R-8 | #40 NST | R-8 | R-8 | #40 NST | #40 NST |
| Quill Diameter | 3.38″ | 3.38″ | 3.38″ | 4.13″ | 3.38″ | 3.38″ | 4.13″ | 4.13″ |
| Quill Travel | 5″ | 5″ | 5″ | 5″ | 5″ | 5″ | 5″ | 4.25″ |
| CNC? | Non CNC | Non CNC | Non CNC | Non CNC | CNC | CNC | CNC | CNC |
| CNC Axis | N/A | N/A | N/A | N/A | 2 | 3 | 2 | 3 |
| Mill Model: | FTV-2F | MVM-1 | MVM-2 | MVM-4 | Millimatic II | Millimatic III | Mega 4 Surface | Mega 4 Volume |
|---|---|---|---|---|---|---|---|---|
| Table Size | 55.25″ x 10″ | 49″ x 9″ | 50″ x 10″ | 58″ x 12″ | 55.25″ x 10″ | 55.25″ x 10″ | 58″ x 11″ | 58″ x 11″ |
| Weight Cap: | 750 lb | 400 lb | 661 lb | 1,200 lb | 750 lb | 750 lb | 1,200 lb | 1,200 lb |
| X Travel | 38″ (34.5″ w/PF) | 30″ | 35″ (32″ w/PF) | 39.37″ | 36″ | 36″ | 37.38″ | 41″ |
| Y Travel | 15.98″ | 12″ | 16″ | 15.35″ | 15.25″ | 15.25″ | 14.6″ | 14.5″ |
| Z Travel | 15.98″ | 16″ | 16″ | 15.75″ | 16″ | 16″ | 15.75″ | 15.75″ |
| Ram Travel | 22.44″ | 15.35″ | 22.04″ | 20″ | 22.2″ | 22.2″ | 20″ | 20″ |
| Motor HP | 5 HP | 3 HP | 3 HP | 5 HP | 5 HP | 5 HP | 5 HP | 5 HP |
| RPM Range | 55-4,250 | 60-4,200 | 60-4,500 | 60-4,300 | 55-4,250 | 55-4,250 | 60-4,300 | 60-4,300 |
| Drilling Cap | 1.25″ | |||||||
| Milling Cap | 4 Cu in/min | |||||||
| Boring Range | Up to 8″ | |||||||
| Spindle Taper | R-8 | R-8 | R-8 | #40 NST | R-8 | R-8 | #40 NST | #40 NST |
| Quill Diameter | 3.38″ | 3.38″ | 3.38″ | 4.13″ | 3.38″ | 3.38″ | 4.13″ | 4.13″ |
| Quill Travel | 5″ | 5″ | 5″ | 5″ | 5″ | 5″ | 5″ | 4.25″ |
| CNC? | Non CNC | Non CNC | Non CNC | Non CNC | CNC | CNC | CNC | CNC |
| CNC Axis | N/A | N/A | N/A | N/A | 2 | 3 | 2 | 3 |
* All Product Specs are Subject to Change at Any Time
One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at:
PARTS@LAGUN.COM
or call
800.421.2105
*Applies to domestic sales only.