| MODEL: | UTC-1440 | UTC-1640 | UTC-1660 | UTC-1740 | UTC-1760 | UTC-1840 | UTC-1860 | UTC 2240 | UTC 2260 | UTC 2280 | UTC 22120 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of control axis | 2 AXIS | 2 AXIS | 2 AXIS | 2 AXIS | |||||||
| Swing over the bed | 14.17” (360 mm) | 16.14” (410 mm) | 16.14” (410 mm) | Ø 17.12" (435mm) | Ø 17.12" (435mm) | Ø 18.11" (460mm) | Ø 18.11" (460mm) | Ø 22” (550 mm) | Ø 22” (550 mm) | Ø 22” (550 mm) | Ø 22” (550 mm) |
| Swing over the cross slide | 7.08” (180 mm) | 9.05” (230 mm) | 9.05” (230 mm) | ||||||||
| Distance between centers | 35” (880 mm) | 35” (880 mm) | 55” (1400 mm) | 37.40” (950mm) | 57.08” (1450mm) | 35.43” (900mm) | 55.11” (1400mm) | 34.25” (870 mm) | 53.93” (1370 mm) | 73.62” (1870 mm) | 113” (2870 mm) |
| Working length Max (4 way tool post / Hyd. P8 turret) | 29.52”(750mm)/ 24.8”(630mm) | 29.52”(750mm)/ 24.8”(630mm) | 49.61”(1260mm)/ 44.88”(1140mm) | 31.50” (800mm)/ 25.59” (650mm) | 51.18” (1300mm)/ 45.27” (1150mm) | 29.52” (750mm)/ 23.62” (600mm) | 49.21” (1250mm)/ 43.3” (1100mm) | 26.77” (680 mm) | 46.45” (1180 mm) | 66.14” (1680 mm) | 105.5” (2680 mm) |
| Working Dia. Max (4 way tool post / Hyd. P8 turret) | 6.7”(170mm)/ 6.29”(160mm) | 8.66”(220mm)/ 8.27”(210mm) | 8.66”(220mm)/ 8.27”(210mm) | 9.0” (230mm)8.66” (220mm) | 9.0” (230mm)8.66” (220mm) | 10.2” (260mm)/ 9.84” (250mm) | 10.2” (260mm)/ 9.84” (250mm) | Ø 12.8” (325 mm) | Ø 12.8” (325 mm) | Ø 12.8” (325 mm) | Ø 12.8” (325 mm) |
| Bed Width | 10.236” (260 mm) | 10.236” (260 mm) | 10.236” (260 mm) | 12” (305mm) | 12” (305mm) | 12” (305mm) | 12” (305mm) | 13.58” (345 mm) | 13.58” (345 mm) | 13.58” (345 mm) | 13.58” (345 mm) |
| Bed Ways (induction hardened & ground) | 3 “V”, 3 flat | 3 “V”, 3 flat | 3 “V”, 3 flat | 2 “V”, 2 flat | 2 “V”, 2 flat | 2 “V”, 2 flat | 2 “V”, 2 flat | ||||
| Cross slide (X) travel | 8.07” (205 mm) | 8.5” (216 mm) | 9.05” (230mm) | 9.05” (230mm) | 9.05” (230mm) | 9.05” (230mm) | 11.8” (300 mm) | 11.8” (300 mm) | 11.8” (300 mm) | 11.8” (300 mm) | |
| Longitudinal (Z) travel | 32.08” (815 mm) | 32.08” (815 mm) | 52.16” (1325 mm) | 35.43” (900mm) | 55.11” (1400mm) | 33.46” (850mm) | 53.15” (1350mm) | 30.7” (780 mm) | 50.4” (1280 mm) | 70.1” (1780 mm) | 109.4” (2780 mm) |
| Spindle nose, Standard | Camlock D1-6 or Optional ASA A1-6 | Camlock D1-6 or Optional ASA A1-7 | Camlock D1-6 or Optional ASA A1-8 | D1-6 MT (OPT. A1-6) | D1-6 MT (OPT. A1-6) | A2-6, Ø69 mm | A2-6, Ø69 mm | ASA A2-8, Ø 3.8” (97 mm) | ASA A2-8, Ø 3.8” (97 mm) | ASA A2-8, Ø 3.8” (97 mm) | ASA A2-8, Ø 3.8” (97 mm) |
| Spindle bore | 2.066” (52.5 mm) | 2.066” (52.5 mm) | 2.066” (52.5 mm) | Ø 2.06” (52.5mm), OPT. Ø 2” (51mm) | Ø 2.06” (52.5mm), OPT. Ø 2” (51mm) | Ø 2.56" (65mm) | Ø 2.56" (65mm) | Ø 3.5” (91 mm) / Ø 3.07” (78 mm) | Ø 3.5” (91 mm) / Ø 3.07” (78 mm) | Ø 3.5” (91 mm) / Ø 3.07” (78 mm) | Ø 3.5” (91 mm) / Ø 3.07” (78 mm) |
| Spindle taper | No. 6 MT | No. 6 MT | No. 6 MT | No. 6 MT | No. 6 MT | Taper 1/20 | Taper 1/20 | Taper 1/20 | Taper 1/20 | Taper 1/20 | Taper 1/20 |
| Spindle speeds | 25~3000 RPM (Pneumatic Auto-Shift) | 25~3000 RPM (Pneumatic Auto-Shift) | 25~3000 RPM (Pneumatic Auto-Shift) | Infinitely variable | Infinitely variable | Infinitely variable | Infinitely variable | Infinitely variable | Infinitely variable | Infinitely variable | Infinitely variable |
| Range | L: 25~480 RPM (Infinitely Variable)H: 481~3000 RPM (Infinitely Variable) | L: 25~480 RPM (Infinitely Variable)H: 481~3000 RPM (Infinitely Variable) | L: 25~480 RPM (Infinitely Variable)H: 481~3000 RPM (Infinitely Variable) | L: 30 ~ 450 RPMH: 451 ~ 2800 RPM | L: 30 ~ 450 RPMH: 451 ~ 2800 RPM | L: 270 ~ 830 RPM H: 831 ~ 2500 RPM | L: 270 ~ 830 RPM H: 831 ~ 2500 RPM | 35-3,500 rpm | 35-3,500 rpm | 35-3,500 rpm | 35-3,500 rpm |
| Gear steps | Pneumatic change 2 steps | Pneumatic change 2 steps | Pneumatic change 2 steps | Pneumatic change 2 steps | |||||||
| Main spindle motor | 10 HP (7.5 Kw) / 30 min rated 15HP (11Kw) | 11 HP (7.5 Kw) / 30 min rated 15HP (11Kw) | 12 HP (7.5 Kw) / 30 min rated 15HP (11Kw) | AC 7.5 HP (5.5 kW) | AC 7.5 HP (5.5 kW) | STD AC 11HP (7.5 kW)/ STD AC 15 HP (11 kW) | STD AC 11HP (7.5 kW)/ STD AC 15 HP (11 kW) | AC 12 HP (9 kW) wide range heavy duty Fanuc AC spindle motor | AC 12 HP (9 kW) wide range heavy duty Fanuc AC spindle motor | AC 12 HP (9 kW) wide range heavy duty Fanuc AC spindle motor | AC 12 HP (9 kW) wide range heavy duty Fanuc AC spindle motor |
| Tool station: | STD. Manual 4 way tool post; Optional: Elec. H4 or Hydraulic P8 turret | STD. Manual 4 way tool post; Optional: Elec. H4 or Hydraulic P8 turret | STD. Manual 4 way tool post; Optional: Elec. H4 or Hydraulic P8 turret | Manual 4-way tool post (STD) | Manual 4-way tool post (STD) | Manual 4-way tool post (STD) | Manual 4-way tool post (STD) | ||||
| Size of external turning tool | Tool section 0.78” (20mm). | Tool section 0.78” (20mm). | Tool section 0.78” (20mm). | 1” (25 mm) | 1” (25 mm) | 1” (25 mm) | 1” (25 mm) | ||||
| Boring Bar diameter | 0.78” (20mm). | 0.78” (20mm). | 0.78” (20mm). | Manual 4 way tool post / Ø 0.79” (20mm) | Manual 4 way tool post / Ø 0.98” (25mm) | Manual 4 way tool post / Ø 0.98” (25mm) | |||||
| Quill diameter | 2.283” (58 mm) | 2.283” (58 mm) | 2.283” (58 mm) | Ø 2.67” (68mm) | Ø 2.67” (68mm) | Ø 2.67” (68mm) | Ø 2.67” (68mm) | Ø 3.35” (85 mm) | Ø 3.35” (85 mm) | Ø 3.35” (85 mm) | Ø 3.35” (85 mm) |
| Quill taper | # 4 MT | # 4 MT | # 4 MT | MT No. 4 | MT No. 5 | #5 MT | #5 MT | #5 MT | #5 MT | ||
| Quill travel | 5.5” (140 mm) | 5.5” (140 mm) | 5.5” (140 mm) | 6” (153mm) | 6” (153mm) | 6” (153mm) | 6” (153mm) | 7” (178 mm) | 7” (178 mm) | 7” (178 mm) | 7” (178 mm) |
| AC servo motor ( X-axis / Z-axis ) | 0.85 kW 5.39 N.m/ 1.3 kW 8.34 N.m | 0.85 kW 5.39 N.m/ 1.3 kW 8.34 N.m | 7.0N.m ~ FANUC ß8 / 3000is | 7.0N.m ~ FANUC ß8 / 3000is | |||||||
| Servo drive motors (X / Z) | 1 HP (0.75 kW, 3.5 Nm)/ 1.61 HP (1.2 kW, 7 Nm) | 1 HP (0.75 kW, 3.5 Nm)/ 1.61 HP (1.2 kW, 7 Nm) | 1 HP (0.75 kW, 3.5 Nm)/ 1.61 HP (1.2 kW, 7 Nm) | ||||||||
| Ball screw Dia. (X / Z) | 0.787” (20 mm) (P5, C5)/ 1.260” (32 mm) (P10, C5) | 0.787” (20 mm) (P5, C5)/ 1.260” (32 mm) (P10, C5) | 0.787” (20 mm) (P5, C5)/ 1.260” (32 mm) (P10, C5) | Ø 0.787” (20 mm) P5 C5/ Ø 1.57” (40 mm) P10 C5 | Ø 0.787” (20 mm) P5 C5/ Ø 1.57” (40 mm) P10 C5 | Ø 1.57" (20mm) P10 C5/ Ø 0.787" (40mm) P5 C5 | Ø 1.57" (20mm) P10 C5/ Ø 0.787" (40mm) P5 C5 | Ø 0.98”(25 mm) P5 C5/ Ø 1.97” (50 mm) P10 C5 | Ø 0.98”(25 mm) P5 C5/ Ø 1.97” (50 mm) P10 C5 | Ø 0.98”(25 mm) P5 C5/ Ø 1.97” (50 mm) P10 C5 | Ø 0.98”(25 mm) P5 C5/ Ø 2.48” (63 mm) P10 C5 |
| Rapid traverse (X / Z) | 295 IPM (7.5MPM)/ 394 IPM (10MPM) | 295 IPM (7.5MPM)/ 394 IPM (10MPM) | 295 IPM (7.5MPM)/ 394 IPM (10MPM) | 196.8 ipm (5 m/min) / 295.3 ipm (7.5 m/min) | 196.8 ipm (5 m/min) / 295.3 ipm (7.5 m/min) | 295 ipm (7.5 m/min) / 394 ipm (10 m/min) | 295 ipm (7.5 m/min) / 394 ipm (10 m/min) | X = 295 ipm (7.5 mpm)Z = 394 ipm (10mpm) | X = 295 ipm (7.5 mpm)Z = 394 ipm (10mpm) | X = 295 ipm (7.5 mpm)Z = 394 ipm (10mpm) | X = 295 ipm (7.5 mpm)Z = 394 ipm (10mpm) |
| Positioning accuracy | ±0.0002” (±0.005 mm) | ±0.0002” (±0.005 mm) | ±0.0002” (±0.005 mm) | ± 0.0005” (0.01 mm) | ± 0.0005” (0.01 mm) | ± 0.0005” (0.01 mm) | ± 0.0005” (0.01 mm) | ||||
| Repeatability | ±0.0002” (±0.005 mm) | ±0.0002” (±0.005 mm) | ±0.0002” (±0.005 mm) | ± 0.0002” (0.005 mm) | ± 0.0002” (0.005 mm) | ± 0.0002” (0.005 mm) | ± 0.0002” (0.005 mm) | ||||
| Resolution | ±0.0001” (±0.00254 mm) | ±0.0001” (±0.00254 mm) | ±0.0001” (±0.00254 mm) | ± 0.0001” (0.002 mm) | ± 0.0001” (0.002 mm) | ± 0.0001” (0.002 mm) | ± 0.0001” (0.002 mm) | ||||
| Hydraulic tank | STD 5.5 gal (25 L), OPT 8.8 gal (40 L) | STD 5.5 gal (25 L), OPT 8.8 gal (40 L) | STD 5.5 gal (25 L), OPT 8.8 gal (40 L) | STD 5.5 gal (25 L), OPT 8.8 gal (40 L) | 6.6 gal. (25 liters) – STD , 10.5 gal. (40 liters) – Optional | 6.6 gal. (25 liters) – STD , 10.5 gal. (40 liters) – Optional | 6.6 gal. (25 liters) – STD , 10.5 gal. (40 liters) – Optional | 6.6 gal. (25 liters) – STD , 10.5 gal. (40 liters) – Optional | |||
| Coolant tank | 50L (11gl) | 50L (11gl) | 70L (15.4gl) | 13.2 gal (60 L) | 19.7 gal (85 L) | 13.2 gal (60 L) | 19.7 gal (85 L) | 15.85 gal. (60 liters) | 31.70 gal. (120 liters) | 47.5 gal. (180 liters) | 63.40 gal. (240 liters) |
| Hydraulic oil pump | OPT. 1HP (0.75kw) | OPT. 1HP (0.75kw) | OPT. 2HP (1.5kw) | OPT. 1 HP (0.75 kW), OPT. 2 HP (1.5kW) | OPT. 1 HP (0.75 kW), OPT. 2 HP (1.5kW) | OPT. 1HP (0.75 kW), OPT. 2HP (1.5kW) | |||||
| Forced lubrication for headstock | ¼ HP(0.18KW) | ¼ HP(0.18KW) | ¼ HP(0.18KW) | ¼ HP | ¼ HP | ¼ HP | ¼ HP | ||||
| Coolant pump | 70L (15.4gl) | 70L (15.4gl) | 70L (15.4gl) | 1/6 HP | 1/6 HP | 1/6 HP | 1/6 HP | ||||
| Weight (Net/Gross) Approx. | 4629 lbs (2100 Kgs.)/ 5732 lbs (2600 Kgs.) | 4739 lbs (2150 Kgs.)/ 5842 lbs (2650 Kgs.) | 4960lbs (2250 Kgs.)/ 6062 lbs (2750Kgs.) | 4739 lbs / 5842 lbs 2150 kgs / 2650 kgs) | 5291 lbs / 6393 lbs (2400 kgs/2900 kgs) | 5170 lbs / 6270 lbs (2350 kgs / 2850 kgs) | 5720 lbs / 6820 lbs (2600 kgs/3100 kgs) | 4050 kg/4450 kg | 4400 kg/4900 kg | 4800 kg/5400 kg | 5300 kg/6000 kg |
| Packing Sizes (L x W x H) | 97.24”(2470mm) x 80”(2030mm) x 87”(2200mm) | 97.24”(2470mm) x 80”(2030mm) x 87”(2200mm) | 117”(2980mm) x 80”(2030mm) x 87”(2200mm) | 104.72” (2660m) x 79.33” x 88.2” (2015mm x 2240mm) | 124.4” (3160mm) x 79.33” x 88.2” (2015mm x 2240mm) | 112.6” (2860mm) x 83.3” x 92.1” (2115mm x 2340mm) | 12.3” (3360mm) x 83.3” x 92.1” (2115mm x 2340mm) | 126”x90.6”x87.8” (3200 mm x 2300 mm x 2230 mm) | 145.7”x90.6”x87.8” (3700 mm x 2300 mm x 2230 mm) | 165.4”x90.6”x87.8” (4200 mmx 2300 mm x 2230 mm) | 204.7”x90.6”x87.8” (5200 mm x 2300 mm x 2230 mm) |
Lagun Engineering’s UTC-1740 Universal Turning Center, with constant surface speed, user friendly conversational control system, and manual hand wheel control.
*Note: Interested in more Universal Turning Center lathes? Please take a look at our UTC-2240/60/80/120 and UTC-1660 models. Or feel free to browse all our CNC Lathes here.
Check us out on Instagram for more posts and videos!
| Machines | Lathes |
|---|---|
| Machine Categories | |
| Machine Type |
Industry-leading Lagun Engineering has a wide variety of solutions for numerous industries and businesses. From the small garage machinist to the aerospace, medical and defense industries, Lagun delivers unmatched quality and precision.
Email: info@lagun.com
Phone: (310) 518-1100
Toll Free: (800) 421-2105
Hablamos Español
Fax: (310) 830-0923
