Republic Lagun Machine Tool ATV-916-TM Ultra Precision Lathe
OUTSTANDING FEATURES
- Designed to machine precision small diameter parts
- Guaranteed spindle runout of 50 millionths of an inch, in a controlled environment
- 5 HP Electronic Variable Speed (EVS) with RPM Digital display and quick-change hi-lo lever.
- Spindle is mounted in high precision pre-loaded angular contact ball bearings eliminating radial and end play.
- Solid hardened and ground tool steel bed
- Cross and compound slide with hardened and ground screws
- Ball bearing precision 5C lever type collet closer
- Solid one-piece cast headstock with outstanding rigidity
- Full-bearing tailstock with graduated quill and quick release of tools
- Quick-acting tool post slide for threading
- Flood coolant pump and piping
- Heavy gauge steel pedestal with storage compartment
DESCRIPTION
Introducing Republic Lagun’s American Turnmaster ATV-916-TM Ultra Precision Manual Lathe with a 9″ swing. This lathe is a high speed, high precision manual lathe designed to machine precision, small diameter parts .
*Note: Interested in other Ultra Precision Lathes? Please take a look at our ATV-900-SO or ATV-910-FL models. Or browse all manual lathes offered by Republic Lagun here.
Check us out on Instagram for more posts and videos!
SPECIFICATIONS
| Features | ATV-900-SO | ATV-910-FL | ATV-916-TM |
|---|---|---|---|
| Swing over bed ways | 9” (229 mm) | 9” (229 mm) | 9” (229 mm) |
| Swing over carriage | — | - | 15” (380 mm) |
| Swing over cross slide | 3.75” (95 mm) | - | - |
| Length of bed | 36”(915 mm) | 10”(254 mm) | 36”(915 mm) |
| Spindle speeds, number | Infinitely variable | Infinitely variable | Infinitely variable |
| Spindle speed range | 0 - 4,000 RPM | 0 - 4,000 RPM | 0 - 4,000 RPM |
| Spindle nose, ID/OD, 5C | 4° | 4° | 4° |
| 5C Round collets | 1.06”(27 mm) | 1.06”(27 mm) | 1.06”(27 mm) |
| 5C Hex collets | .87”(22 mm) | .87”(22 mm) | .86”(22 mm) |
| 5C Square collets | - | .75” (19 mm) | .74”(19 mm |
| with expanding collets | 3”(76 mm) | 3”(76 mm) | 3”(76 mm) |
| with step chucks | 1.06(27mm) | 6”(152.4 mm) | 1.06 to 6”(27 to 152 mm) |
| with jaw chucks | 6”(150 mm) | 5”(127 mm) | 6”(150 mm) |
| Compound slide travel | - | - | 4.25” - 5.5”(108 -140 mm) |
| Tailstock spindle diameter | - | - | 1.35”(35 mm) |
| Spindle taper | - | - | No. 2 MT |
| Spindle travel | - | - | 3.75”(95 mm) |
| Main drive, EVS | 3 HP | 1 HP EVS | 3 HP EVS |
| Voltage | 3/60/220 | 3/60/220 | 3/60/220 |
| Features | ATV-900-SO | ATV-910-FL | ATV-916-TM |
|---|---|---|---|
| Swing over bed ways | 9” (229 mm) | 9” (229 mm) | 9” (229 mm) |
| Swing over carriage | — | – | 15” (380 mm) |
| Swing over cross slide | 3.75” (95 mm) | – | – |
| Length of bed | 36”(915 mm) | 10”(254 mm) | 36”(915 mm) |
| Spindle speeds, number | Infinitely variable | Infinitely variable | Infinitely variable |
| Spindle speed range | 0 – 4,000 RPM | 0 – 4,000 RPM | 0 – 4,000 RPM |
| Spindle nose, ID/OD, 5C | 4° | 4° | 4° |
| 5C Round collets | 1.06”(27 mm) | 1.06”(27 mm) | 1.06”(27 mm) |
| 5C Hex collets | .87”(22 mm) | .87”(22 mm) | .86”(22 mm) |
| 5C Square collets | – | .75” (19 mm) | .74”(19 mm |
| with expanding collets | 3”(76 mm) | 3”(76 mm) | 3”(76 mm) |
| with step chucks | 1.06(27mm) | 6”(152.4 mm) | 1.06 to 6”(27 to 152 mm) |
| with jaw chucks | 6”(150 mm) | 5”(127 mm) | 6”(150 mm) |
| Compound slide travel | – | – | 4.25” – 5.5”(108 -140 mm) |
| Tailstock spindle diameter | – | – | 1.35”(35 mm) |
| Spindle taper | – | – | No. 2 MT |
| Spindle travel | – | – | 3.75”(95 mm) |
| Main drive, EVS | 3 HP | 1 HP EVS | 3 HP EVS |
| Voltage | 3/60/220 | 3/60/220 | 3/60/220 |
| Features | ATV-900-SO | ATV-910-FL | ATV-916-TM |
|---|---|---|---|
| Swing over bed ways | 9” (229 mm) | 9” (229 mm) | 9” (229 mm) |
| Swing over carriage | — | – | 15” (380 mm) |
| Swing over cross slide | 3.75” (95 mm) | – | – |
| Length of bed | 36”(915 mm) | 10”(254 mm) | 36”(915 mm) |
| Spindle speeds, number | Infinitely variable | Infinitely variable | Infinitely variable |
| Spindle speed range | 0 – 4,000 RPM | 0 – 4,000 RPM | 0 – 4,000 RPM |
| Spindle nose, ID/OD, 5C | 4° | 4° | 4° |
| 5C Round collets | 1.06”(27 mm) | 1.06”(27 mm) | 1.06”(27 mm) |
| 5C Hex collets | .87”(22 mm) | .87”(22 mm) | .86”(22 mm) |
| 5C Square collets | – | .75” (19 mm) | .74”(19 mm |
| with expanding collets | 3”(76 mm) | 3”(76 mm) | 3”(76 mm) |
| with step chucks | 1.06(27mm) | 6”(152.4 mm) | 1.06 to 6”(27 to 152 mm) |
| with jaw chucks | 6”(150 mm) | 5”(127 mm) | 6”(150 mm) |
| Compound slide travel | – | – | 4.25” – 5.5”(108 -140 mm) |
| Tailstock spindle diameter | – | – | 1.35”(35 mm) |
| Spindle taper | – | – | No. 2 MT |
| Spindle travel | – | – | 3.75”(95 mm) |
| Main drive, EVS | 3 HP | 1 HP EVS | 3 HP EVS |
| Voltage | 3/60/220 | 3/60/220 | 3/60/220 |
* All Product Specs are Subject to Change at Any Time
One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at:
PARTS@LAGUN.COM
or call
800.421.2105
*Applies to domestic sales only.
